DA41S Simple CNC Press Brake

Cooperating with the industrial association and plentiful expert factories, we can quickly match 2-3 suppliers for your selection.

Just appoint one person to communicate with us, we have experienced team members to help you through the process, saving your time&labor cost. Our agency fee is as low as 3% of the purchasing amount.

Our agents will take the responsibility to negotiate with suppliers and convey the message to you clearly in English.

We will audit the production capacity, quality management system, certificate, and social responsibility to identify the abilities and qualifications of the factories.

The press brake price depends on the machine capacity, configurations, optional devices, degree of automation, axis quantity, controller difference, etc. Here we will give you a brief introduction about how much does the CHZOM press brake cost:
Econom press brake
This is the most economic press brake among HARSLE Product. This is widely accepted by startup and new operators. Actually, its price starts from USD3,500, when the bending capacity and bending length is more, the price will increase accordingly. This type of press brake is equipped with X any Y axis and its operation will be much easier than other high-level machines. CHZOM will use E21 controller as the standard for the cheapest level, customer can also upgrade it into DELEM DA-41S, TP10S, CT8 controllers, compared with E21, these controllers can program the bending angle for fast bending purpose, but they are all torsion-bar structure.
Smart press brake
This is the second level in CHZOM press brake. It will be upgraded from torsion-bar structure into electro-hydraulic type. The controller will be smarter and more functional. There will be two proportional valves on the top of two cylinders and two linear scales on each side of the machine vertical plate. The linear encoder can detect the distance between cylinder and the table for each side and give the feedback to CNC controller, when the controller gets the signal, it will send the signal to the proportional valve to control the movement of the cylinder. They will be a closed-loop system.
When we talk about the press brake, we will also think more about the back-gauge axis. The press brake price varies by the quantity of the axis. Actually, if you want to add one more axis, the price will be USD2,000-USD2,500 more. The smart press brake can support Maximum 4+1 axis and X+R axis for the back gauge.
For the controller, mostly we will recommend DA-52S, DA53T, DA-58T from DELEM or CT 8PS, CT12 from CYBELEC or S530, S630 from ESA.
Genius press brake
This is the highest level in CHZOM press brake, this will be chosen by most of professional companies or the customers who have high requirement on the fabrication process, like aerospace industry and automobile industry. The axis will be upgraded into like 6+1 axis or 8+1 axis and the controller will support 3D simulation or 3D programming, it will largely optimize the bending process, the offline software will be the helpful tool to boost the productivity and this software will be for free. Actually Genius press brake price will be 1.5 times higher than smart press brake, but if customer will choose other configurations, the price will increase accordingly. 

1. Punch and die is the important part for bending process, we need to choose the right punch and die for our products before running the machine.
2. Because the die v opening is corresponding to the bending sheet thickness, we need to choose the right opening for the bending job.
3. Because this is hydraulic press brake machine, we need to prepare the hydraulic oil firstly. The oil type is #46 anti-wear hydraulic oil and we need to fill the tank until it is full.
4. We need to prepare the necessary cable according to the machine power in advance, when we get the cable, one end will be connected to the power, another end will be connected to the machine electric cabinet.
5. After the connection of the cable, we will start the machine power and pump and check the motor rotating direction, if the direction is anticlockwise, we need to exchange the cable each line and try again until the rotating direction is clockwise.
6. When the machine is running, we need to program on the controller according to the product that we will bend step by step, we can also operate in manual mode or auto mode according to our bending purpose.
7. After the programming, we will put the metal sheet on the bottom die and start the bending work step by step and finish the product finally.

 +86 18912936653