• The machine has three-axis, X-axis (longitudinal moving of the tool tip), Y-axis (up and down), Z-axis (vertical moving of the tool tip) servo motor control, realizes full-automatic operation after parameter input, and comprehensively improves the planer Precision.
• The pressing system uses the hydraulic system as the power, the pressure is large, and the fastening force is reliable. At the same time, low noise and low energy consumption.
• The rear moving part is driven by double ball screw, and the positioning accuracy of the board surface is high.
• The tool holder slide is made of cast iron material, which is wear-resistant and repairable, and the service life is guaranteed for more than ten years.
Specification
Model | VC-3212 | VC-3215 | KC-4012 | KC-6015 | KC-8012 | |
Machining Capacity
| Material | STS304&Q235 | ||||
Length | 3200mm | 3200mm | 4000mm | 6000mm | 8000mm | |
Width | 1250mm | 1500mm | 1250mm | 1500mm | 1250mm | |
Thickness | 0.6mm-4mm | |||||
Max. Grooving depth | 3mm | |||||
CNC Specifications | Control Type | 3-axis CNC control(X | ||||
Display | 10 inch HD LCD color screen | |||||
Memory Capacity | 99 groups,9999channels/group (additional SD card extension) | |||||
Working System | Ball screw/linear guide/rack and pinion | |||||
Machining Sped | X Axis | 0-90m/min | ||||
Y Axis | 20m/min | |||||
Z Axis | 20m/min | |||||
Machining Precision | X Axis Precision | 0.01mm | ||||
Y Axis Precision | 0.01mm | |||||
Z Axis Precision | 0.01mm | |||||
Driving Mode | X-Axis | 4.5KW Servo Motor | ||||
Z-Axis | 2KW Servo Motor | |||||
Y1&Y2 | 1KW Servo Motor | |||||
Clamping Device | Pneumatic | 0.3-0.6Mpa | ||||
Dimensions | Length | 5000mm | 5000mm | 5800mm | 7800mm | 9800mm |
Width | 2550mm | 2750mm | 2350mm | 2750mm | 2750mm | |
Height | 2100mm | 2100mm | 1780mm | 2100mm | 2100mm | |
Worktable Flatness | ±0.02mm | |||||
Worktable Quench | Yes |
Detailed Images
Home About Us Qualification Application & Technology Blog Contact Us